Complete Clutch Cable
Diameter: 2.0mm, Length: 2m

Complete Clutch Cable
Diameter: 2.0mm, Length: 2m

Complete clutch cable:

• Inexpensive accessory for production or repair of throttle and clutch cables.
• The cable is approx. 2.0 m in length.
• Different versions available.
• A real cost-saver!
• Diameter 2.0 mm
• Screw-fit nipple dia.: 5.8 mm
• Long screw-fit nipple: 4.1 mm

Tip: To solder the nipple onto the cable so that it can withstand a load, the end of the cable must first be degreased. Thinners or similar agents will not suffice for this task - the cable needs to be cleaned with special "soldering fluid"!

Note: Cables are always routed in gentle curves, so the cable inner requires a little play within its housing in order to operate smoothly. Always choose a cable housing with an inside diameter at least 1 mm greater than the thickness of the inner cable. 2.5 mm clutch cables run even more smoothly in a 4.5 mm housing.