BREMBO DISCS 68B40781

Go to Brembo articles

More than brakes!

Around 50 years ago, the Italian company started out producing brake discs for cars. Further brake system components such as brake calipers and brake pumps followed. In 1972, Brembo supplied brakes as original equipment for Moto Guzzi for the first time. From 1975, Ferrari Formula 1 cars began using Brembo brake technology. Today Brembo is the OEM for BMW, KTM, Harley-Davidson, Ducati and MV Agusta, among others.Brembo has dominated the motorcycle racing scene for many years now: over 20 titles in both the MotoGP and Superbike World Championship are impressive evidence of the superiority of Brembo's brake technology.And the secrets behind this success story? A passion for racing, the determination to always be the best, lots of meticulous development work and relentlessly high requirements on the quality of materials and workmanship.

Stainless steel is a collective term for rustproof steel. It is much more resistant to corrosion than non-alloyed steels. Stainless steel does not deteriorate, and is hygienic, UV-resistant, non-corroding, fracture-proof, non-toxic and environmentally friendly. It does not weather and can be recycled in its entirety, even after many years. Technically, the term "stainless steel" refers to corrosion-resistant steel alloys with a wide variety of compositions but always containing a high percentage of chromium (usually a minimum of 10.5%)

.

MAINTENANCE:
Stainless steel should be cleaned regularly like all other materials, especially after exposure to salty air (near the coast), and also at regular intervals.
Water can easily collect in corners, edges and screw connections, resulting in corrosion. So careful cleaning is important, and if necessary screws should be undone in order to clean the parts thoroughly.
Do not leave rusty steel parts against stainless steel to avoid the rust "contamination".

The German "Allgemeine Betriebserlaubnis (ABE)" (general type approval) authorises the use of the relevant accessories on the vehicle models listed in the certificate booklet. The certificate booklet must be carried along when driving and must be presented on request in the event of a traffic control or the main inspection (HU).
Accessories with an ABE do not have to be registered in the vehicle documents. However, if you do not want to carry the certificate with you at all times, you can have it registered (at a charge) by the TÜV, for example.
If the accessories are to be used on a vehicle that is not listed in the ABE, an individual approval is necessary.

The regulations in other countries may differ. Before ordering a product, please make sure that it may be used in road traffic in your region, your country.

Made in Italy