Brembo Brake-Discs Floating Disc
Type-approved for Germany
Brembo Brake-Discs Floating Disc Type-approved for Germany
With its *Oro* series and *Genuine* product lines, Brembo makes a complete range of brake discs to meet every requirement. They are the same quality as brake discs supplied to the manufacturers of the world's most exciting motorbikes.
Brembo *Oro* brake discs from Brembo® are the best on the market - top-quality high-tech products. Multiple processing cycles ensure minimal tolerances and optimal flatness and concentricity.
These "floating" discs are made with top-quality materials to give unbeatable performance. They comprise a stainless-steel brake band (braking surface) connected by 10 drive pins to the inner section, which is made of CNC-machined, anodised aluminium alloy.
- The brake discs are supplied individually; for double-disc systems, please order two
- Read the enclosed safety instructions prior to installation
- Replacement for the OEM brake disc
- Semi-floating version with 10 floaters, riveted
- Inner section made of special aluminium, CNC-machined and black anodised
- Perforated stainless-steel brake ring
- With type approval for Germany
- If, as with Order no. 10043417 (Harley Davidson models, rear) a fixed brake disc is replaced with a floating disc, it is important to check that the floaters can move freely.
- Our YouTube video "How to: change brake discs" shows you exactly how to do the job.
More than brakes!
Around 50 years ago, the Italian company started out producing brake discs for cars. Further brake system components such as brake calipers and brake pumps followed. In 1972, Brembo supplied brakes as original equipment for Moto Guzzi for the first time. From 1975, Ferrari Formula 1 cars began using Brembo brake technology. Today Brembo is the OEM for BMW, KTM, Harley-Davidson, Ducati and MV Agusta, among others.Brembo has dominated the motorcycle racing scene for many years now: over 20 titles in both the MotoGP and Superbike World Championship are impressive evidence of the superiority of Brembo's brake technology.And the secrets behind this success story? A passion for racing, the determination to always be the best, lots of meticulous development work and relentlessly high requirements on the quality of materials and workmanship.
This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.
To ensure that it gives you many years of service, please observe the following care instructions:
1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).
2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).
German type approval ("ABE)" allows the relevant accessory to be used on the vehicle models listed in the test report. Here it is the type abbreviation and not the maker's designation that is important for identifying the vehicle. The test report must be carried when riding in case it needs to be presented at a road-side check or vehicle safety inspection.
Accessories with type approval do not have to be registered in the vehicle documents! Those who do not want to carry the test report with them all the time can (for example) arrange to have the product registered by the Technical Inspection Association (subject to a charge).
If the accessory is to be used on a vehicle that is not listed in the type approval, an individual component approval is required. Although ABE type approval confirms the proper installation and safety of the product, it is the inspector who has to decide according to his technical expertise whether it is suitable for use on the vehicle.
An electric scooter with "ABE" approval has a type approval for Germany stating that the relevant vehicle satisfies all the relevant requirements of the eKFV (Small Electric Vehicle Ordinance in Germany) for the approval. In addition, insurance of the electric scooter is compulsory and use on pavements is forbidden. It can only be ridden on cycle paths and on the road (if a cycle path is not available). The minimum age for riding an electric scooter is 14 years. Although a driving license and helmet are not mandatory, they are highly recommended. An electric scooter must always be ridden solo.
Stainless steel is a collective term for rustproof steel. It is much more resistant to corrosion than non-alloyed steels. Stainless steel does not deteriorate, and is hygienic, UV-resistant, non-corroding, fracture-proof, non-toxic and environmentally friendly. It does not weather and can be recycled in its entirety, even after many years. Technically, the term "stainless steel" refers to corrosion-resistant steel alloys with a wide variety of compositions but always containing a high percentage of chromium (usually a minimum of 10.5%)
Stainless steel should be cleaned regularly like all other materials, especially after exposure to salty air (near the coast), and also at regular intervals.
Water can easily collect in corners, edges and screw connections, resulting in corrosion. So careful cleaning is important, and if necessary screws should be undone in order to clean the parts thoroughly.
Do not leave rusty steel parts against stainless steel to avoid the rust "contamination".
Made in Italy