Handlebar end mirror XC-130, piece

Go to PROTECH brand shop

License Plate Brackets, Chain Guards and Radiator Covers

Protech enhances motorcycles, both in terms of styling and technical design. Stainless steel and aluminium accessories from Protech for many popular motorcycle models are both high-quality and great-looking. The slender yet very strong license plate brackets blend with the design of your machine better than many stock brackets. This is equally true of the laser-cut Protech chain guards. And the radiator covers are not only eye-catching, but also protect the delicate radiator fins against stone chip damage.

This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.

To ensure that it gives you many years of service, please observe the following care instructions:

1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).

2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).

Various types of modern vehicle accessories now often carry an "E" mark that is valid throughout Europe. The "E" mark, a combination of numbers and letters, is clearly visible on the product and provides information about the tested area of application, the country in which the test was carried out, and, if applicable, the vehicle type for which the approval applies. EC type approvals for exhaust systems, for example, are always vehicle type-specific, while those for lighting equipment apply to entire groups of vehicles, such as motorbikes.
The legislator has designated this test mark as the sole proof of legality, i.e., a written report is not required, nor is registration necessary. In addition, however, the applicable guidelines of the StvZO (German Road Traffic Licensing Regulations) must always be observed during installation.
During a traffic check or at the general inspection appointment, the vehicle owner has fulfilled their obligation to provide proof by presenting the test mark. The inspecting officer is then free to check the test mark via the KBA in Flensburg, where all test marks can be decoded.

Original parts on newer vehicles that are factory-fitted with an E-mark may only be replaced with accessories that are also E-approved. For example, an E-approved mirror may not be replaced with one that only complies with German registration law.

Dimension sketch mirror